-
Case of 12 DFL is an excellent, fast-drying release agent for injection molding where clarity and deep draw are important, especially with hard, brittle resins. It will not create hydraulic effect on deep drafted molds. Its dry formulation will not pick up dust or dirt and remains inert when exposed to corrosive reagents. -
DuraKote is a special air-drying release that will not transfer onto the molded part. It provides a dry, dust-free film on all hard-surfaced molds. It won't discolor and is paintable when it is baked on. Available in BULK ONLY - 1-gallon, 5-gallon and 55-gallon Contact us for pricing and delivery -
Case of 12 The E/S mold release formula is a breakthrough in lubrication. This E/S formulation contains silicone oil. Effective in many applications, especially on molds 212°F and above, it is an excellent wet silicone lubricant for many applications. It's a great mold release for environmentally conscious companies. -
Case of 12 Econo-Spray® 1 contains a highly effective, non-paintable silicone fluid in a non-chlorinated solvent carrier system. It will give an excellent release with all thermoplastics. -
Case of 12 Econo-Spray® 2 is a paintable release in a non-chlorinated solvent carrier system. It permits post-decorating of molded parts without prior cleaning. -
Case of 12 Econo-Spray® 3 contains a highly effective non-silicone release in a non-chlorinated solvent carrier system. This product is highly paintable, and will permit ultra-sonic welding of molded parts. It affords excellent release of all thermoplastics. -
Case of 12 Economical Silicone-based mold release. NSF registered formulation safe for food applications. Non-paintable. -
Case of 12 EpoxEase is a synthetic wax-based, non-silicone release. It is formulated to prevent the sticking commonly seen when using all-purpose release agents on epoxies, maximizing your productivity. -
Case of 12 Heavy-Duty 10% Mold Release provides Slide's highest percentage of active ingredients for a release agent. Food-approved formulation that is paintable. -
Case of 12 Bring on the heat. Hi-Temp 1800 is the perfect partner to maximize productivity with high-temperature resins. Formulated with Boron Nitride, Hi-Temp maintains its lubrication integrity, helping maximize productivity. It is also an excellent release for die-casting of low melting point metals such as lead, zinc and aluminum. -
Case of 12 Knock Out is the mold release that works where others have failed. It gets ?sticky parts? cleanly out of the mold and is approved for indirect food contact. Knock Out mold release imparts a light, dry coating that is amazingly effective, working for several cycles without re-application. Paintable formulation. -
Out of stock
DISCONTINUED Case of 12 LMR is a non-silicone, fully paintable mold release. It is non-crazing and will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating. There is no build up on mold surfaces and minimal migration.
