-
Case of 12 DFL is an excellent, fast-drying release agent for injection molding where clarity and deep draw are important, especially with hard, brittle resins. It will not create hydraulic effect on deep drafted molds. Its dry formulation will not pick up dust or dirt and remains inert when exposed to corrosive reagents. -
DuraKote is a special air-drying release that will not transfer onto the molded part. It provides a dry, dust-free film on all hard-surfaced molds. It won't discolor and is paintable when it is baked on. Available in BULK ONLY - 1-gallon, 5-gallon and 55-gallon Contact us for pricing and delivery -
Case of 12 The E/S mold release formula is a breakthrough in lubrication. This E/S formulation contains silicone oil. Effective in many applications, especially on molds 212°F and above, it is an excellent wet silicone lubricant for many applications. It's a great mold release for environmentally conscious companies. -
Case of 12 Econo-Spray® 1 contains a highly effective, non-paintable silicone fluid in a non-chlorinated solvent carrier system. It will give an excellent release with all thermoplastics. -
Case of 12 Econo-Spray® 2 is a paintable release in a non-chlorinated solvent carrier system. It permits post-decorating of molded parts without prior cleaning. -
Case of 12 Econo-Spray® 3 contains a highly effective non-silicone release in a non-chlorinated solvent carrier system. This product is highly paintable, and will permit ultra-sonic welding of molded parts. It affords excellent release of all thermoplastics. -
Case of 12 Economical Silicone-based mold release. NSF registered formulation safe for food applications. Non-paintable. -
Case of 12 EpoxEase is a synthetic wax-based, non-silicone release. It is formulated to prevent the sticking commonly seen when using all-purpose release agents on epoxies, maximizing your productivity. -
Case of 12 Heavy-Duty 10% Mold Release provides Slide's highest percentage of active ingredients for a release agent. Food-approved formulation that is paintable. -
Case of 12 Bring on the heat. Hi-Temp 1800 is the perfect partner to maximize productivity with high-temperature resins. Formulated with Boron Nitride, Hi-Temp maintains its lubrication integrity, helping maximize productivity. It is also an excellent release for die-casting of low melting point metals such as lead, zinc and aluminum. -
Case of 12 Knock Out is the mold release that works where others have failed. It gets ?sticky parts? cleanly out of the mold and is approved for indirect food contact. Knock Out mold release imparts a light, dry coating that is amazingly effective, working for several cycles without re-application. Paintable formulation. -
Out of stock
DISCONTINUED Case of 12 LMR is a non-silicone, fully paintable mold release. It is non-crazing and will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating. There is no build up on mold surfaces and minimal migration. -
Economical Paintable mold release requires no special cleaning. It will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating operations. You get perfect finishes every time and more cycles per can over other comparable releases. -
Case of 12 It's all in the name. Polycarbonate mold release. Specially developed for polycarbonate resins, it will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating. Approved by SABIC for use with Lexan* resin. *Lexan is a registered trademark of SABIC. -
Case of 12 A pure non-silicone oil is also offered (part # 45700). Call for details. Pure Eze is a white oil-based, food-approved release ideal for medical and food applications. Use Pure Eze with all thermoplastic resins, polyolefins, polycarbonates, rubber and some epoxies. It is colorless, odorless, tasteless and will not change color over time. -
Case of 12 Quick Lecithin imparts a smooth, dry film so you can begin production immediately. Lecithin is food-approved and paintable. Non-silicone formula will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating. -
Case of 12 Quick Paintable mold release imparts a smooth, dry film, drying quickly so you can start molding immediately. Quick Paintable release will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating. -
Case of 12 Quick Silicone mold release is ideal for parts that are a little more challenging. It dries quickly and imparts a smooth, dry film so you can start molding immediately. Quick Silicone is food-approved for food machinery. -
Case of 12 Get more cycles per spray, more cycles per can, with Slide's Silicone high-quality, pure silicone-oil mold release. Keeps the most challenging parts from hanging up and stalling production. Extremely effective for injection and compression molding. -
Case of 12 SSL Mold Release is an economical Silicone-based mold release. NSF registered formulation that is safe for food applications. Non-paintable. -
Case of 12 Thermoset mold release is made with synthetic carnauba wax, the most effective formulation for molded thermoset plastics, rubber and similar materials. It stops parts from sticking, maximizing your productivity. It is ideal for injection, compression and transfer molding. -
Case of 12 Universal is just that, a broad universal release that can be used on all thermoplastics, even more sensitive plastics. It uses a non-silicone and paintable release oil. Approved as a direct food additive, Universal also meets certain requirements for molding medical products - contact us for details. Universal will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating. -
Sale!
Case of 12 Urethane mold release is extremely effective for all polyurethanes: rigid, semi-rigid and flexible urethane foams. Urethane mold release imparts a light, dry coating on the mold, eliminating build-up. Yet, it is so effective that it continues to work for several cycles between applications. Non-paintable formulation. -
Case of 12 Available in 25lb bag - Part#41025 A dry, light, water-repellent powder, Zinc Stearate is economical to use and gives better finishes. Use it for polycarbonates, polypropylenes, polysulfones and rubber molding. Compatible with oil-based paints, its formulation results in fewer rejects and lower production costs. -
25lb Bag Available in Aerosol - Part#41012N A dry, light, water-repellent powder, Zinc Stearate is economical to use and gives better finishes. Use it for polycarbonates, polypropylenes, polysulfones and rubber molding. Compatible with oil-based paints, its formulation results in fewer rejects and lower production costs.
