BWPIC12
12 Zone Mold Power Input Connector with 6″ wire leads, For 15amps applications
Description
Mold Power Input Connectors are mounted on the mold to accept power cable(s) from the Mainframe. They are supplied with six inches of numbered leads and a ground wire. All three 15 AMP connectors are the same physical size and use 14-gauge wire. Only the number of active pins change. Each is equipped with an integral retaining latch to provide a secure cable connection. Connector configuration ensures proper insertion of cable. Splicing of 6″ leads to heater power leads is easily accomplished with the Insulated Crimp Connectors supplie
Additional information
| Weight | 1.0 kg |
|---|---|
| Dimensions | 10 × 10 × 10 cm |
