Phone: 519-737-7333 | Fax: 519-737-7337|info@bluewaterheater.com

DuraKote Mold Release Agent for Thermosets 417

Available on backorder

DuraKote is a special air-drying release that will not transfer onto the molded part. It provides a dry, dust-free film on all hard-surfaced molds. It won’t discolor and is paintable when it is baked on.

Available in BULK ONLY – 1-gallon, 5-gallon and 55-gallon

Contact us for pricing and delivery

Description

  • Semi-permanent release for urethane & epoxy molding
  • Curable silicone oil (can be baked or air dried onto the mold surface)
  • Paintable when baked on
  • Solvent-free dry formulation
  • Excellent mold release for rotational molding
  • Maximum operating temp: 600°F/315°C

NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith.

Available in BULK ONLY – 1-gallon, 5-gallon and 55-gallon

1-gallon, 5-gallon and 55-gallon bulk products are made-to-order and are non-refundable. A small quantity can be provided as a free trial sample before ordering.

Click here for the SDS/MSDS

Click here for the Technical Data Sheet

WARNING: This product can expose you to chemicals including Ethylbenzene and Toluene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.