Phone: 519-737-7333 | Fax: 519-737-7337|info@bluewaterheater.com

DFL Dry Film Lube Mold Release Agent 41112N

$204.99

Case of 12

DFL is an excellent, fast-drying release agent for injection molding where clarity and deep draw are important, especially with hard, brittle resins. It will not create hydraulic effect on deep drafted molds. Its dry formulation will not pick up dust or dirt and remains inert when exposed to corrosive reagents.

SKU: 41112N Categories: ,

Description

  • No chlorinated solvents
  • Formulated for deep draw molds
  • Excellent for most rubber & thermoplastics including ABS, polycarbonate, nylon and vinyl
  • Use it on phenolic & urethane resins
  • Contains PTFE
  • Maximum operating temp: 500°F/260°C

NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith.

Available in Bulk

All cylinders, 1-gallon, 5-gallon and 55-gallon bulk products are made-to-order and are non-refundable. A small quantity can be provided as a free trial sample before ordering.

Shipping information (Case of 12)

No special shipping charges required for ground aerosol shipments. Air shipments may require extra charges and paperwork as determined by carrier.

Click here for the SDS/MSDS

Click here for the Technical Data Sheet

Additional information

Weight 5.1 kg
Dimensions 28.0 × 21.0 × 21.0 cm